Quality wood products from around the world.
InterGlobal Forest Overview
Higher density MDF board, coloured black in the mass, with a transparent glossy finishing coat on both sides. Each panel has a self-adhesive protective film on both sides. The boards have a particularly screwable core. The board is subject to minimal expansion and swelling in conditions of high humidity.
MDF Fibralux MR Black Brillant has low formaldehyde emission (E1 class). Upon request, this MDF board can be supplied with PEFC, FSC or FSC Controlled Wood certificate.
| Sizes (ft) | Max width: 4', Max length: 10' |
| Thickness (in) | 45/64 |
| Finish | Transparent glossy |
| Class | Type MDF-HLS according to EN 622-5 |
| Certs |
|
The board can be applied in service class 2 (restrictions in temperature and ambient humidity) and can be used in biological hazard classes 1 and 2 of EN 335-3.
During and especially after installation the boards must, wherever possible, be optimally protected from any direct contact with water. They must be stacked flat, on a pallet or using a sufficient number of cross members. Boards should not be stored vertically, unless ground contact can be avoided. The board will expand/shrink under variable humidity conditions, albeit to a lesser extent than standard MDF, meaning that an expansion space must be provided for at all times. Use suitable sawing, milling and drilling tools.
Important remark : MDF Fibralux MR Black Brillant is coloured black in the mass. However, there may be colour differences between different production batches and thicknesses. It is advisable to use boards from the same production batch for each project.